De functie

• Je bent verantwoordelijk voor de automatisatie en opstart van de geïnstalleerde systemen bij de klanten. • Volgende taken vallen onder het uitgebreide takenpakket: configureren, programmeren van project specifieke functies en processen, testen
van de software. • Je laadt het programma op, voert kalibraties uit, doet een fine-tuning van de software en geeft training aan de gebruikers. • Budgetbewaking en levertijden zijn essentieel. Kwaliteitsopvolging en klanttevredenheid
vallen ook onder jouw bevoegdheden. • Je verleent assistentie op vlak van Service na verkoop, tele-support in jouw kennisdomein ‘automatisatie’.

Jouw profiel

• Je bent in het bezit van een Bachelor of Master bij voorkeur in de richting Elektromechanica of Automatisatie of dergelijk. • Je hebt bij voorkeur een eerste relevante ervaring in PLC-programmatie, batch-applicaties of visualisatiesystemen. • Je werkt
graag samen in team en ook graag autonoom, je drukt je goed uit in het Nederlands, Engels en Frans. • Je werkt graag klantgericht, bent analytisch ingesteld en hebt een sterke zin voor initiatief. Door jouw creativiteit en flexibiliteit
sta je open voor vernieuwing en verbetering.

Wij bieden

• Een boeiende en gevarieerde functie binnen een gewaardeerd ingenieursbureau • Een marktconform salaris met een scala aan extra legale voordelen (bedrijfswagen/mobilieitspakket volgens cafetariaplan, maaltijd- en ecocheques, groeps- en hospitalisatieverzekering,…)
• Opleidingsmogelijkheden via ons persoonlijk ontwikkelingsplan • Een job met autonomie waarbij ook jij zelf zorgt voor jouw work/life balance.

Functie

Je versterkt het team van projectingenieurs die projecten beheren voor onze internationale klanten.
 Sommige documenten zijn terugkerend binnen de projecten, je zorgt ervoor dat deze gestandaardiseerd worden zodat die als handleiding kunnen dienen.
 Je beheert input in het ERP-systeem (opmaken van artikelteksten, aanmaken van artikelcodes, opvolgen van data in het systeem ifv levertermijn, …)
 Updaten van handleidingen met 3D beelden
 Voorbereiden van technische documentatie (bvb instructieboeken samenstellen ifv het project/de klant, …)
 Voorbereiden/opmaken van omvangstekeningen in het tekenprogramma Catia
 Beheren en communiceren over project gerelateerde documenten zowel intern (collega’s, verschillende afdelingen, …) als extern (klanten, leveranciers, …)

Je profiel

Goede communicator en teamspeler
Graduaat of bachelorsdiploma met goede kennis van mechanica en elektriciteit
Standaard Officepakketten kennen geen geheimen voor jou
Affiniteit met motoren, versterkt je kandidatuur
Relevante ervaring in een projectomgeving en/of technische omgeving is een troef

Wij bieden jou

Je komt terecht in een dynamische omgeving waar je mag rekenen op een grondig opleidingstraject.
We voorzien een competitief loon in functie van jouw ervaring en competenties.
Heb je zelf interesse of ken je iemand die in aanmerking zou kunnen komen?
Solliciteren kan bij
Heye Esther; eh@abc-engines.com

Functie

 Projectopvolging van Aanmaak contract tot Zorgvrije afname/installatie van de motor bij de klant
 Uitwerken van technische oplossingen en implementatieplannen voor (internationale) klantenprojecten
 Verwerken van de klantvraag naar technische ontwerpspecificaties
 Beheren en communiceren over project gerelateerde documenten zowel intern (collega’s, verschillende afdelingen, …) als extern (klanten, leveranciers, …)
 Bijwonen van de testen die bij het project horen in de proefbankomgeving
 Bezoeken van scheepswerven, ontwerpbureaus, …
 Budgetopvolging van de lopende projecten
 Bewaken van de veiligheids- en milieureglementering eigen aan de projecten/motoren

Je profiel

Goede communicator en teamspeler
Bachelorsdiploma (bij voorkeur in elektromechanica) met goede kennis van mechanica en elektriciteit
Standaard Officepakketten kennen geen geheimen voor jou
Affiniteit met motoren, versterkt je kandidatuur
Relevante ervaring in een projectomgeving en/of technische omgeving is een troef

Wij bieden jou

Je komt terecht in een dynamische omgeving waar je mag rekenen op een grondig opleidingstraject.
We voorzien een competitief loon in functie van jouw ervaring en competenties.
Heb je zelf interesse of ken je iemand die in aanmerking zou kunnen komen?
Solliciteren kan bij
Heye Esther; eh@abc-engines.com

Job location: Ghent, Belgium
The Cargill site in Ghent consists of a rapeseed/soybean crush plant, a vegetable oil semi-refinery, a multi-feedstock biodiesel plant & a waste-based biodiesel plant

Position Purpose & Impact
The Maintenance and Reliability Planner will plan basic routine mechanical maintenance on our plant assets and equipment following established program guidelines. In this role, you will develop detailed job plans to improve the work force efficiency and quality by identifying the elements of an executable work package. You will provide general knowledge of consistent maintenance and reliability best practices in the completion of planning and prioritizing basic tasks and providing quality work that supports organizational goals.

Key Accountabilities

• Research and compile information and feedback necessary to generate highly effective and detailed job plans.
• Initiate the procurement of materials, special tools and unique items required in the job plans using relevant maintenance programs and database tools.
• Prepare detailed job plans as required on general maintenance activities and schedule downtime and partner with more senior team members to identify opportunities to improve reliability and reduce lost production.
• Maintain custom databases to support specific work projects and processes.
• Plan the execution of basic repair procedures and tasks to ensure compliance with the fundamental plant maintenance procedures and practices.
• Review all completed work orders for completeness and accuracy and update the machinery history data in the tracking system as required.
• Provide reports to keep the maintenance leaders informed of work progress and future work schedules.
• Handle basic issues and problems under direct supervision, while escalating more complex issues to appropriate staff.
• Make arrangements & work together with contractors to organize interventions and services (scaffolding, insulation,…)
• Other duties as assigned

Qualifications
Minimum Qualifications

• Bachelor’s degree in a related field or equivalent experience
• Other minimum qualifications may apply

Our Offer
In return for your expertise and commitment, we will provide a fast paced stimulating international environment, which will stretch your abilities and channel your talents. We also offer competitive salary and benefits combined with outstanding career development opportunities in one of the largest and most solid private companies in the world.

If you are interested in joining our team please follow this link to apply:
https://careers.cargill.com/en/job/ghent/maintenance-planner/23251/63857422480

Job location: Ghent, Belgium
The Cargill site in Ghent consists of a rapeseed/soybean crush plant, a vegetable oil semi-refinery, a multi-feedstock biodiesel plant & a waste-based biodiesel plant

Job Purpose & Impact
The Build Project Engineer will plan, monitor, execute and coordinate low complexity build projects. In this role, you will ensure that the goals and objectives are accomplished within the prescribed timeframe and budget.
You are the lead engineer for civil, mechanical and piping disciplines and work closely with the electrical, instrumentation and automation engineers.

Key Accountabilities

• Manage low complexity projects and act as the lead engineer for civil, mechanical and piping disciplines for all projects.
• Help implement the strategic vision to the project team and ensure best practices are incorporated in project delivery to champion safety, meet regulatory requirements and deliver build projects with excellence.
• Assist in the implementation of project management best practices based on thorough knowledge.
• Collaborate with cross functional professionals to leverage knowledge and strategies to effectively plan projects.
• Proactively plan and schedule project progress and key metrics to mitigate risk and increase project performance.
• Collaborate with business stakeholders to ensure the business value and benefits are enabled.
• Provide engineering support to plant personnel.
• Other duties as assigned

Qualifications

• Bachelor’s degree in industrial engineering or in a related field or equivalent experience
• Two years of related work experience is preferred
• Dutch speaking or willing to learn
• English and/ or French are a plus
• Other minimum qualifications may apply

Our Offer
We provide a fast paced stimulating international environment, which will stretch your abilities and channel your talents. We also offer competitive salary and benefits combined with outstanding career development opportunities
in one of the largest and most solid private companies in the world. If you are interested in joining our team please follow this link to apply:

https://careers.cargill.com/en/job/ghent/project-engineer/23251/60186036176

What is the Technical Management Trainee Program about? We aim to develop top diverse talent towards future expert and managerial roles for our technical and food science function at Cargill. The program offers access
to accelerate development on the job and through other channels during a 24-month program which may include depending on your area of expertise:

• Leading or participating in continuous improvement projects in an operations environment, having interaction with finance, maintenance and reliability, manufacturing technology, engineering, safety and quality.
•  Being responsible for a significant piece of the production process and for the people that make it happen.
• Participating actively in the safety and food safety in our operations.
• Learning on the job with experts, developing technical and soft skills and receiving coaching from your manager and peers.
• Participating in structured learning (digital and instructor led) to develop your technical, professional and leadership skills with peers across Europe, Middle East and Africa, learning from each other during the different sessions
  of the Cargill European Graduate program.
• Building a peer network across Cargill.

What you will bring to Cargill (REQUIRED)

• Master or University degree in Engineering (Mechanical, Chemical / Biochemical, Process, Agricultural, Food Science).
• Entry level work experience (up to 2 years) and/or an internship in relevant areas.
• Fluency in English and Dutch.

What you will bring to Cargill (PREFERRED)

• Proven natural leadership ability and excellent interpersonal skills.
• Teamwork; ability to work in a multi-cultural and multi-functional teams.
• High integrity and ethical standards.
• Self-starter; highly motivated and able to work independently. Willingness to take responsibility and initiative. Demonstrated experience in prioritizing work and meeting deadlines.
• Fast learner and oriented to self-development: curiosity to learn and create new way of building and/or improving systems and processes.
• Strong analytical skills and ability to proactively identify and resolve problems.
• Flexibility; able to cope with fast changes within a growing company.
• Willingness and flexibility to travel in case required.

Our Offer We will provide a fast-paced stimulating international environment, which will challenge and stretch you. We also offer competitive salary and benefits combined with outstanding career development opportunities
in one of the largest private companies in the world! At Cargill, everyone matters and everyone counts. Cargill is committed to creating and sustaining an inclusive and diverse work environment where all employees are treated with
dignity and respect. As such and in alignment with our Guiding Principles, Cargill’s long-standing equal employment opportunity policy prohibits discrimination and harassment against any employee or applicant based on race, ethnicity,
color, religion, national origin, ancestry, sex, gender, gender identity, gender expression, sexual orientation, age, disability, pregnancy, genetic information, marital status, family status, citizenship status, veteran status, military
status, union affiliation, or any other status protected by law. Cargill is also aligned with all applicable national and local laws and regulations pertaining to non-discrimination and employment.

Where will it take you? Project Leader or Project Engineer As Project Leader or Project Engineer, you will be responsible for electricity infrastructure projects. This includes the construction, expansion
and replacement of high-voltage substations. You will work autonomously and in groups to develop and implement projects, always with an eye on safety first. You will lead a multidisciplinary team, manage the project planning and budget,
and participate in tenders and procurement processes. You will also coordinate the execution of work in cooperation with colleagues, suppliers and contractors. You will strive for technical and safety improvements and contribute to
the growth of the Infrastructure department and Elia through active participation in transversal working groups.

Junior Asset Manager As Junior Asset Manager, you will be working in the field. You will ensure that the infrastructures that have been built keep running smoothly. Initially, you will work alongside
an experienced Asset Manager, who will guide you in your daily work, allowing you to learn primarily on the job. You will join maintenance teams, take part in activities with stakeholders and follow technical training courses at home
and abroad. The goal is for you to develop yourself into a fully-fledged Asset Manager.

Regional Grid Developer As Regional Grid Developer, you are responsible for mapping out all the needs and requirements of the regional transmission system. Together with the Power System Planning team,
you compare and analyse various grid developments and draw up an operating plan for the grid’s evolution in the short, medium and long term. After approval, you will translate this vision into concrete projects. You will be responsible
for the technical and budgetary aspects and work together with various departments within Elia. You will develop technical and economic expertise on grid development and play a central role in energy transition. As an expert, you contribute
to defining the criteria for grid developments and represent its vision in internal and external working groups.

Your Profile Are you the Young Graduate we’re looking for?

• Academic Excellence: You hold or are about to complete a master’s degree in industrial- or civil engineering.
• Open-Minded Creativity: You bring an open and creative mindset. We value out-of-the-box ideas!
• Drive and Proactiveness: You are eager to learn, hands-on, and proactive. You thrive on challenges and seek innovative solutions.
• Collaborative Spirit: You are a teamplayer, but you can also shine autonomously.
• You share your knowledge and enjoy collaborating.
• Adaptability: You face challenges with flexibility, and you find new ways to tackle disruptions while keeping the project basics in mind (cost, quality, time).
• Communication Skills: Strong communication and soft skills are your assets.
• Technical skills are a plus!
• Network Builder: Are you a born communicator? You can build valuable networks and relationships within Elia effortlessly.
• Multilingual Proficiency: You have knowledge of Dutch, French, and English.

Where will it take you? System Engineer, Market Engineer and Close-To-Realtime Engineer As Close-to-real-time engineer in the National Control Centre (NCC), you ensure safety on the grid. You do this
in cooperation with the Power System Engineers and the Market System Engineers. You will perform calculations and prepare forecasts for System Engineers so that the supply-demand balance of the power grid remains stable and determine
the daily capacities of the grid. You will take preventive measures for energy supply in Belgium and communicate with your colleagues, suppliers and the other neighbouring countries (TSOs). Together with your colleagues, you are the
grid operator and avoid blackouts at all times. As System Engineer in the National Control Centre (NCC), you will be responsible for the continuous monitoring and adjustment of the Belgian high-voltage grid. You will
perform real-time safety analyses, coordinate grid elements for maintenance projects, and help balance electricity supply and demand. You will anticipate overloads and seek solutions together with colleagues and international partners.
In case of severe outages, you will help prevent blackouts and play a crucial role in rebuilding the grid. You will also cooperate on projects to improve efficiency and energy transition. As Market Engineer in the
National Control Centre (NCC), you will guarantee grid safety by balancing production and consumption, evaluating preventive and curative measures and assessing the financial impact. You will manage power generation in Belgium, requests
from market players and international intraday and balancing markets. You will manage short-term exchange capacities at borders, monitor market coupling and the production plan, and activate strategic reserve if necessary. You will
cooperate with real-time engineers and monitor voltage regulation. You will be involved in emergency situations in which the grid is under pressure.

Network and Data Operations Engineer As a NetOp Engineer, you will have the unique opportunity to help build our network and prepare it for the future from our control rooms. You will work on challenges
in the daily expansion of the high-voltage grid, the planning of outages for maintenance and grid expansions, the EMS/SCADA system, our calculation tools, asset data systems and the implementation of change projects. You will join
one of the following teams: regional control rooms, planning teams, data management teams, Operational and Safety Excellence management and project management for change projects. The aim is to develop both technical and management
skills so that you can later work independently as a manager within Network and Data Operations.

KAM Engineer As a KAM Engineer, you will support two experienced KAMs in their daily work and projects. Your responsibilities will include digitising existing processes, supporting grid development
projects and technical analysis, managing customer queries and complaints, and managing customer data. You will act as a liaison between the business and IT teams, ensure correct customer records and strive for fast and appropriate
customer service. #ElectricalElectronicManufacturing #Oil&Energy #Utilities #YoungGraduate #Engineer

Your Profile Are you the Young Graduate we’re looking for?

• Academic Excellence: You hold or are about to complete a master’s degree in industrial- or civil engineering.
• Open-Minded Creativity: You bring an open and creative mindset. We value out-of-the-box ideas!
• Drive and Proactiveness: You are eager to learn, hands-on, and proactive. You thrive on challenges and seek innovative solutions.
• Collaborative Spirit: You are a teamplayer, but you can also shine autonomously.
• You share your knowledge and enjoy collaborating.
• Adaptability: You face challenges with flexibility, and you find new ways to tackle disruptions while keeping the project basics in mind (cost, quality, time).
• Communication Skills: Strong communication and soft skills are your assets.
• Technical skills are a plus!
• Network Builder: Are you a born communicator? You can build valuable networks and relationships within Elia effortlessly.
• Multilingual Proficiency: You have knowledge of Dutch, French, and English.

Functieomschrijving

• Je ontwerpt en configureert de sorteer- of portioneermachine (3D Design) op basis van de ontwerpomschrijving en verwachtingen van onze klant.
• Je krijgt ondersteuning van een projectleader en het team. Met hen bespreek je ook de voortgang van je project.
• Je hebt ook verantwoordelijkheid over de correctheid van stuklijsten en geeft bestellingen of productieorders door voor het project waar jij op werkt.
• Je hebt interesse in de productieafdeling die je dagelijks bezoekt op het moment dat jouw project er wordt afgewerkt.

Wat wordt er van jou verwacht?

• Je hebt het diploma van Bachelor of Master elektromechanica.
• Je hebt kennis van de gangbare office computerprogramma’s, ervaring met 3D ontwerpen en Solidworks is een pluspunt.
• Je staat open voor continue bijscholing en technologische evoluties.
• Je hebt zin voor verantwoordelijkheid, nauwkeurigheid en afwerking.
• Je bent sociaalvaardig, stressbestendig en flexibel.
• Je hebt zin voor werken in teamverband.
• Talenkennis: Nederlands, Engels

Wat bieden wij jou aan?

• Je krijgt de kans mee te bouwen aan een sterk groeiende kmo met internationale activiteiten en technisch hoogstaande oplossingen.
• Je maakt deel uit van een enthousiaste, pragmatische en mensgerichte onderneming
• Je werkt autonoom, krijgt belangrijke verantwoordelijkheden en ruimte voor initiatief
• Je ontvangt een aantrekkelijk en flexibel salarispakket.

Functieomschrijving

• Je ontwikkelt algoritmes en software voor innovatieve MARELEC projecten en machines.
• Je maakt gebruik van geavanceerde technologieën zoals computer vision, artificial intelligence, robotics,..
• Je werkt mee in teamverband volgens de Agile (Scrum) methodologie

Wat wordt er van jou verwacht?

• Ingenieur of master computerwetenschappen, elektronica, wiskunde, artificiële intelligence, of andere relevante wetenschappelijke richting.
• Sterke wetenschappelijke en wiskundige kennis
• Ervaring in software ontwikkeling
• Interesse in het schrijven van performante software in moderne C++ en C#
• Interesse in embedded systems, artificial intelligence, neurale netwerken, computer vision & robotics
• Zin voor gestructureerd werken in een enthousiast team
• Talenkennis: Nederlands en Engels

Wat bieden wij jou aan?

• Een aangename en moderne werkomgeving in een familiaal kader
• Fijne collega’s en een goede werksfeer
• Een boeiende, leerrijke en afwisselende job binnen een sterk groeiend bedrijf dat sterk focust op techno­logische hoogstaande oplossingen
• De nodige autonomie en verantwoordelijkheid
• Een motiverend salarispakket

Prohead Engineering is een groeiend bedrijf waar jouw ontwikkeling centraal staat. Wij werken sámen aan onze projecten omdat hun innovatieve en complexe karakter diepgang verreist. Hierdoor werkt iedereen aan meerdere projecten tegelijk, samen met (meer)
ervaren collega’s, tekenaars en topexperten. Dit doen we allemaal vanuit onze mooie kantoren (en binnentuin) te Meerbeke (geen outsourcing). Bovendien zijn onze klanten divers: (Petro)chemie, Seveso-bedrijven, food, pharma, metallurgie,
… meestal grote spelers met risicovolle processen waar engineering op topniveau een vereiste is. Dit maakt onze job belangrijk, gevarieerd, uitdagend en leerrijk. Hierdoor krijg jij méér ontwikkelingskansen en daar zijn we trots op.

Je wilt graag:

• Samenwerken aan engineering van productielijnen, individuele machines, industriële sites en hun utilities;
• Bestaande complexe productielijnen analyseren, begrijpen, verbeteren en veiliger maken;
• Onze klanten bijstaan om unieke productielijnen richting CE certificatie te helpen (indien mogelijk/wenselijk) of op zen minst de grootste risico’s te verkleinen;
• Je automatisatie ervaring gebruiken om (veiligheids)sturingen te verifiëren, re-engineeren en valideren;
• Performance levels, afschakelmatrices, kabelberekeningen, pneumatica en hydraulica verifiëren, re-engineeren en valideren. In samenwerking met je collega’s en met behulp van professionele software;
• Verdiepen in de nieuwe machineverordening en andere technische wetgeving/normen. Helpen de krijtlijnen uitzetten voor vernieuwingen zoals OT cybersecurity diensteverlening, …;
• Af en toe naar het buitenland gaan voor plaatsbezoeken, FAT en/of SAT (geen must);
• Samenwerken met onze procesingenieurs voor machinelijnen met procesrisico’s en meedenken omtrent chemische processturing (BPCS) en functionele veiligheid (SIS/SIF/SIL) als onderdeel van procesengineering;
• Snel groeien in kennis en kunde door mee te werken met experts;
• Samenwerken met experten uit dezelfde maar ook andere disciplines om samen machinelijnen en proceschemie performanter en veiliger te maken;
• Kwalitatieve engineering leveren dankzij de ondersteuning van je collega’s en onze gestructureerde aanpak;

Je bent:

• Master (Ing./ir.) in Electromechanical/Mechanical/Electrical Engineering;
• Leergierig, analytisch, gestructureerd en nauwkeurig;
• Iemand met automatisatie kennis en/of ervaring;
• Pas afgestudeerd of met ervaring, we hebben projecten voor junior en senior profielen;

Prohead Engineering onderscheidt zich als werkgever door: 

• Teamwork;
• Variëteit door betrokkenheid in meerdere projecten tegelijk;
• Groeien in kennis, samenwerking, aanpak en/of coördinatie van projecten;
• Focus op persoonlijke ontwikkeling van iedere collega;
• Duurzame en innovatieve projecten;
• Familiale sfeer en work-life balance;
• Mooie werkomgeving;
• Leren van experts;

Locatie: Ons HQ in Meerbeke (Ninove). Geïnteresseerd: jobs@prohead.be

Prohead Engineering is een groeiend bedrijf waar jouw ontwikkeling centraal staat. Wij werken sámen aan onze projecten omdat hun innovatieve en complexe karakter diepgang verreist. Hierdoor werkt iedereen aan meerdere projecten tegelijk, samen met (meer)
ervaren collega’s. Dit doen we hoofdzakelijk vanuit onze mooie kantoren (en binnentuin) te Meerbeke. Bovendien zijn onze klanten divers: Nutsbedrijven, (Petro)chemie, Seveso-bedrijven, food, farma, metallurgie, … Dit maakt onze job
belangrijk, gevarieerd, uitdagend en leerrijk. Hierdoor krijg jij méér ontwikkelingskansen en daar zijn we trots op.

Je wilt graag:

• Op een holistische manier je technische kennis combineren met economische kennis en beleid;
• Balanceringsmarkten (FCR,aFRR, mFRR, …) en netondersteuningsdiensten doorgronden;
• Nieuwe technologieën zoals batterijen, H2, vehicle2grid,… leren kennen en becijferen;
• Leren hoe energiemarkten werken en het hoogspanningsnet mee helpen klaarstomen voor de energietransitie;
• Je opgedane kennis ook toepassen bij industriële “early adapters” en hun wegwijs maken op een praktische pragmatische manier;
• Samenwerken met experten uit dezelfde maar ook andere disciplines om samen industriële klanten te helpen met de elektrificatie van hun site;
• Snel groeien in kennis en kunde door mee te werken met experts;
• Kwalitatieve engineering leveren dankzij de ondersteuning van je collega’s en onze gestructureerde aanpak;

Je bent:

• Master in Engineering (Bio/Burgerlijk/Handel);
• Leergierig, analytisch, gestructureerd en nauwkeurig;
• Pas afgestudeerd of hebt al een eerste (paar) ervaring(en);

Prohead Engineering onderscheidt zich als werkgever door:

• Teamwork;
• Variëteit door betrokkenheid in meerdere projecten tegelijk;
• Groeien in kennis, samenwerking, aanpak en/of coördinatie van projecten;
• Focus op persoonlijke ontwikkeling van iedere collega;
• Duurzame en innovatieve projecten;
• Familiale sfeer en work-life balance;
• Mooie werkomgeving;
• Leren van experts;

Locatie: Ons HQ in Meerbeke (Ninove). Geïnteresseerd:
jobs@prohead.be

Wat kenmerkt werken bij SBE?

• SBE komt in actie voor de technische en de complexe projecten, waarin jij je tanden kan zetten;
• Samenwerken in een team van gelijkgezinden, zonder klassieke piramidale/matrix structuur;
• Een familiebedrijf dat écht werk maakt van je work-life balance en een leuke werksfeer;
• De uitdaging om je te blijven verbeteren in je expertise;
• De ruimte om initiatief te nemen, je eigen klemtonen te leggen en je loopbaan vorm te geven binnen je eigen ambities en interesses.

Functieomschrijving Als projectingenieur elektromechanica werk je aan maatschappelijk relevante, uitdagende en multidisciplinaire projecten. Samen met het team – dat bestaat uit ingenieurs burgerlijke bouwkunde
en BIM engineers – ontwerp je bijvoorbeeld mee aan beweegbare bruggen, sluisdeuren en infrastructuurprojecten (waarbij bijvoorbeeld verlichting en tunneltechnieken van belang zijn). Bij deze technologische aspecten verricht jij
het nodige onderzoek, maak je risicoanalyses en geef je vanuit jouw domein-specifieke kennis advies. Een greep uit je mogelijke opdrachten:

• Je werkt in projectcontext, waarbinnen je zal ontwerpen, inventariseren, schematiseren en berekeningen uitvoeren. Je denkt daarbij zowel na over betrouwbaarheid als over de impact van je ontwerpen, zoals bijvoorbeeld de effecten
  op verkeerssituaties en de omwonenden.
• Je werkt concepten in voorontwerpen en startnota’s uit, maakt kwalitatieve rekennota’s en geeft de lastenboeken en meetstaten vorm;
• Je maakt gebruik van de meest geavanceerde software zoals Caneco en SolidWorks/Inventor;
• Je woont sporadisch projectvergaderingen met de klant of andere stakeholders bij, waar je over het project met elkaar in dialoog gaat en feedback uitwisselt;
• Je borgt je opgedane kennis en ervaring via het kennisplatform van SBE en gaat daarover met je collega’s in dialoog.

Vereisten

Over jou Wij kijken naar de persoon achter het CV. Dit zijn alvast enkele elementen die je kunnen doen opvallen:

Professionele ervaring: je hebt idealiter ongeveer 5 jaar ervaring als ingenieur binnen multidisciplinaire projecten. Dit binnen een studiebureau, in een bedrijf actief in de infra-wereld of in de studie-
of onderhoudsafdeling van een groot bedrijf.

Diploma’s en/of opleiding: je hebt één van volgende opleidingen succesvol afgerond:

• Burgerlijk Ingenieur Werktuigkunde-Elektrotechniek (opties mechanisch ontwerp, energietechniek, elektrotechniek…)
• Industrieel Ingenieur Elektromechanica (opties mechanisch ontwerp, automatisering, elektrotechniek…)

Vaardigheden en achtergrond:

• Je bent gepassioneerd door techniek in het algemeen;
• Je hecht belang aan vakgericht zijn en houdt ervan om steeds bij te leren;
• Je bent analytisch, nauwkeurig en gaat planmatig te werk;
• Je werkt graag in teamverband, deelt graag je kennis en kan visie implementeren;
• Je beheerst het Nederlands op moedertaalniveau. Goede kennis van het Engels is vereist, kennis van Frans vormt een pluspunt.

Ons aanbod Wij bieden:

• Samenwerking in een omgeving waar korte communicatielijnen, collegialiteit en het nemen van initiatief volop worden aangemoedigd;
• Een goede begeleiding bij de start om jou de specifieke kennis bij te brengen
• Een uitgebreid opleidingspakket gespreid over je volledige loopbaan;
• Werken vanuit ons hoofdkantoor in Sint-Niklaas + de mogelijkheid tot thuiswerk;
• Tal van activiteiten waaraan je kan deelnemen: BBQ, kerstmarkt, SBE-weekend, sport op het werk,…

Maar natuurlijk ook:

• Een contract van onbepaalde duur;
• Een competitief salarispakket met een uitgebreid pakket aan extralegale voordelen (zoals onder meer groeps- en hospitalisatieverzekering, forfaitaire maandelijkse netto-vergoeding, maaltijdcheques, mobiliteitsbudget, deelname
  in winstbonus,…);
• 12 ADV dagen bovenop je wettelijke vakantiedagen door het presteren van een 40u-week.

SBE is een erkende Great Place To Work®!

Wat kenmerkt werken bij SBE?

• SBE komt in actie voor de technische en de complexe projecten, waarin jij je tanden kan zetten;
• Samenwerken in een team van gelijkgezinden, zonder klassieke piramidale/matrix structuur;
• Een familiebedrijf dat écht werk maakt van je work-life balance en een leuke werksfeer;
• De uitdaging om je te blijven verbeteren in je expertise;
• De ruimte om initiatief te nemen, je eigen klemtonen te leggen en je loopbaan vorm te geven binnen je eigen ambities en interesses.

Functieomschrijving

Geen vacaturetekst gelezen die op je lijf is geschreven, maar wel gecharmeerd door wat SBE te bieden heeft? Of jij bent nog aan het studeren momenteel en wilt een boeiende stage lopen bij SBE of er je Masterproef uitvoeren?

Vereisten

Bezorg ons vrijblijvend je gegevens via de blauwe knop. Bij wederzijdse interesse nodigen we je graag uit voor een verkennend (video)gesprek!

Locatie: Sint-Niklaas, Vlaams Gewest, 
België

• Bad actor programs
• Maintain the existing bad actor programs. Prepare and facilitate multi-disciplinary bad actor work group. Prepare investment budget for bad actor program. Prepare and follow construction works for upgrades. Execute Management
  of Change process for rotating machinery.
• Participate in Root Cause Analysis or internal investigations. Communicate results and action point and follow up.
• Provide support for Extreme Value Analysis for heat exchangers.
• Projects
• Support the local engineering and project team. Check and advice with engineering packages. Make sure that TOTALENERGIES Company specifications are implemented.
• Develop and execute projects (Replacements & Betterments for Maintenance) within your field.
• Preventive en curative maintenance
• Revise and validate preventive and predictive maintenance programs for static equipment. Prepare maintenance instructions for static equipment and support the maintenance teams. Be a valuable resource for others with questions
  concerning maintenance and operation of static equipment. Provide guidance for operation department.
• Provide support for scope exercises and repair procedures for static equipment in turn arounds.
• Repairable spares and external maintenance
• Organize and follow repairable spare workflow and external repairs of static equipment.
• Quality and cost control of external repairs.
• Safety valve maintenance
• Steer safety valve maintenance and follow the performance (works executed by external workshop).
• Organize and lead performance review meetings and adjust test intervals accordingly.
• Be responsible for necessary upgrades/projects.

You will be guided from your first day on the job: education and training are an intrinsic part of your career. Responsibility, independence, and team spirit are key concepts in your commitment to us. In return, we offer you great career opportunities within TotalEnergies.

Your profile:

• Master’s in mechanical or electro mechanical engineering.
• Static equipment technical knowledge, knowledge of petrochemical equipment is a plus.
• Very good organizational and communication competencies.
• Team spirit and analytical mindset.
• Technical feeling and willing to take initiatives.
• Languages: good knowledge of Dutch and English. The knowledge of French is a plus.

We offer:

• The possibility of taking part in projects of great scale and taking responsibilities in a group of world size, which applies the advanced technology.
• An evolution of attractive career allowing to immerse you in a new job, a new activity and a new culture.
• A continuing education. Competitive wages and a broad range of extra-legal advantages.

Looking for a new challenge? Don’t hesitate to apply! 👉

https://totalenergies.avature.net/en_US/careers/JobDetail/Junior-Reliability-Engineer-Static-Equipment/49899

• Bad actor programs
• Maintain the existing bad actor program. Prepare and participate in multi-disciplinary bad actor work group. Prepare investment budget for bad actor program. Prepare and follow construction works for machinery upgrades. Execute
  Management of Change process for rotating machinery.
• Participate in Root Cause Analysis or internal investigations. Communicate results and action point and follow up.
• Projects
• Support the local engineering and project team. Check and advice with engineering packages. Make sure that TOTALENERGIES Company specifications are implemented.
• Develop and execute projects (Replacements & Betterments for Maintenance) within your field (e.g.: mechanical seal upgrades, upgrade of small machinery).
• Preventive en curative maintenance
• Revise and validate preventive and predictive maintenance programs for rotating machinery. Interpret vibration analysis and advise for corrective actions.
• Prepare maintenance instructions for rotating machinery and support the maintenance team. Be a valuable resource for others with questions concerning maintenance and operation of rotating machinery. Provide guidance for operation
  department.
• Repairable spares and external maintenance
• Organize and follow repairable spare workflow and external repairs of rotating machinery.
• Quality and cost control of external repairs.

You will be guided from your first day on the job: education and training are an intrinsic part of your career. Responsibility, independence, and team spirit are key concepts in your commitment to us. In return, we offer you great career opportunities within TotalEnergies.

Your profile:

• Master’s in mechanical or electro mechanical engineering.
• Rotating machinery technical knowledge, knowledge of petrochemical equipment is a plus.
• Very good organizational and communication competencies.
• Team spirit and analytical mindset.
• Technical feeling and willing to take initiatives.
• Languages: good knowledge of Dutch and English. The knowledge of French is a plus.

We offer:

• The possibility of taking part in projects of great scale and taking responsibilities in a group of world size, which applies the advanced technology.
• An evolution of attractive career allowing to immerse you in a new job, a new activity and a new culture.
• A continuing education. Competitive wages and a broad range of extra-legal advantages.

Would you like to join this dynamic and motivated team? We look forward to receiving your application! 👉

https://totalenergies.avature.net/en_US/careers/JobDetail/Junior-Reliability-Engineer-Rotating-Equipment/49896

Your role:

In this role, you maintain close contact with the customer and regularly consult internally about your approach. The projects are versatile, ranging from vision applications over machine learning applications, to control and software-technical challenges.
You look at systems from an electromechanical perspective and understand that software is the intelligence that masters it.

You would be a great fit if…

• You approach systems from a multi-domain perspective with software as the driving intelligence
• You are hands-on and like to realize real-life projects.
• You pride yourself on writing clean, robust code.
• You value team work and team spirit.
• You feel comfortable with Python, Matlab/Simulink, C, C++ programming languages

It would be even better if…

• You’re familiar with hardware (IPC, PLC brands like Siemens or Beckhoff)
• You’re an excellent communicator.
• You have experience with GIT
• You have experience with Docker, Compose, ROS.
• You are familiar with Agile practices, DevOps, CI/CD.

What we offer:

Vintecc is offering you a job with a lot of variation and responsibility. You will be supported by a young team of professionals in order to stay at the forefront of new innovations. Vintecc has an open and friendly culture where you get the freedom to
explore and grow with the company. Last but not least, you will get a competitive compensation.

Your role:

As a robotics software engineer you are responsible for the technical implementation of the Robotics projects within Vintecc. Backed by our in-house developed technology platforms in the field of simulation and IoT, you will use your technical skillset
and knowledge to develop new algorithms and control strategies to create smart autonomous robots.

You would be a great fit if…

• you are a master in engineering (controls, mechatronics, electronics)
• You are hands-on and like to realize real-life projects.
• You pride yourself on writing clean, robust code.
• You value team work and team spirit.
• You have experience with Linux, ROS and simulation engines

It would be even better if…

• You’re familiar with hardware and deployment.
• You’re an excellent communicator.
• You have experience with camera technology or LiDAR embedded systems
• You have affinity with path planning, localisation and object detection algorithms
• You have knowledge about control systems

What we offer:

Vintecc is offering you a job with a lot of variation and responsibility. You will be supported by a young team of professionals in order to stay at the forefront of new innovations. Vintecc has an open and friendly culture where you get the freedom to
explore and grow with the company. Last but not least, you will get a competitive compensation.

• Be responsible for the design, ease of operation and maintenance of the electrical equipment, automation systems and instruments in the assigned manufacturing plants and/or loading facilities at the Yara Sluiskil site;
• Develop and implement maintenance strategies for E&A equipment and instruments based on required performance criteria develop operational & maintenance procedures and standards;
• Perform functional analysis, cost driver investigation, identify, initiate and implement reliability improvements and provide technical support to Operations and the local E&A Maintenance organization;
• Participate in modification and expansion projects;
• You’ll build relations with technical personnel within Yara Sluiskil, third parties, other Yara sites and the technical network within Yara International;
• Participate in the E&A Supervisor call-out organization.

You’ll make sure that all activities are being executed in conformance with Yara’s Values & Management system.

About Yara Sluiskil

Yara Sluiskil is Yara’s largest production site. Yara Sluiskil is located at the Ghent-Terneuzen canal and manufactures nitrogen fertilizers and industrial chemicals such as Air 1® and NOxCare®, but also CO2 for the soft drink industry and breweries.
Our vision for the world is based on ensuring a nature-positive food future. A collaborating community that overcomes cultural, environmental, and economic barriers to create solutions that will lead to a world free from hunger and
a planet respected.

Who are you?

You are a motivated competent team player with excellent coordination, communication and social skills. You have the ability to solve complex problems, are eager to drive your own development and anticipate well in a challenging and dynamic environment.

• Bachelor or Master degree in (electro)Mechanical Engineering;
• Experience in engineering and maintenance of electrical equipment, automation systems and instruments in a chemical production environment;
• Excellent safety and reliability mindset;
• Fluent in Dutch and English.

Do you recognize yourself in the description above, but are some qualifications missing? Yara wants to invest in people, so we would like to get in touch with you!

What do we offer you?

• Working in an international environment with an open company culture and a strong focus on sustainability;
• Competitive salary and benefits (thirteenth salary, 48 days of annual leave, healthcare benefit);
• Awareness for positive work-life balance (flexible hours, occasional homework);
• Good accessibility from the Ghent area;
• A warm welcome and personal coaching;
• And on top of that, a bag of homemade fertilizer every year.

Do you feel the chemistry?

Please apply via our website! For more information about the job content, please contact Samantha de Moor, HR Business Partner (tel. +31 115 474 870) or Albert Platteeuw, Technical Support Manager (tel. +31 115 474 401)

• You’ll build relations with technical personnel within Yara Sluiskil, third parties, other Yara sites and the technical network within Yara International;
• Lead teams during preparation and construction;
• Work in close cooperation with the inspection team in order to determine the best suitable repair procedures;
• Participate in the mechanical call-out organization.

You’ll make sure that all activities are being executed in conformance with Yara’s Values & Management system.

About Yara Sluiskil

Yara Sluiskil is Yara’s biggest production site. Yara Sluiskil is located in the Ghent-Terneuzen canal and manufactures nitrogen fertilizers and industrial chemicals such as Air 1® and NOxCare®, but also CO2 for the soft drink industry and breweries.
Our vision for the world is based on ensuring a nature-positive food future. A collaborating community that overcomes cultural, environmental, and economic barriers to create solutions that will lead to a world free from hunger and
a planet respected.

Who are you?

You are a highly motivated team player with excellent coordination, communication and social skills. You have the ability to solve complex problems, are eager to drive your own development and anticipate well in a challenging and dynamic environment.

• Bachelor or Master degree in (electro)Mechanical Engineering;
• Experience in maintenance, turnarounds and projects of chemical plants;
• Excellent safety and reliability mindset;
• Fluent in Dutch and English.

Do you recognize yourself in the description above, but are some qualifications missing? Yara wants to invest in people, so we would like to get in touch with you!

What do we offer you?

• Working in an international environment with an open company culture and a strong focus on sustainability;
• Competitive salary and benefits (thirteenth salary, 48 days of annual leave, healthcare benefit);
• Awareness for positive work-life balance (flexible hours, occasional homework);
• Good accessibility from the Ghent area;
• A warm welcome and personal monitoring;
• And on top of that, a bag of homemade fertilizer every year.

Do you feel the chemistry?

Please apply via our website! For more information about the job content, please contact Samantha de Moor, HR Business Partner (tel. +31 115 474 870) or Johan Huigh, Technical Support Manager Portfolio (tel. +31 115 474 152).

• Working with- and in a multi-discipline team of experienced colleagues to improve and/or optimize maintenance and turnaround performance;
• Support the production plants on the applicable discipline during normal operations and interventions like turnarounds and repairs. Perform inspections, trouble shooting, discussing together with operations and/or maintenance technicians,
  advise and elaborate on best repair methodologies, materials to be used and guide such work;
• Optimizing reliability and availability of plant-processes, e.g. by developing, improving and implementing preventative maintenance-plans for existing and/of new rotating equipment;
• Advise and follow up on various repairs and special maintenance (overhauling);
• Manage (spare-) parts of turnarounds and (modification) projects for rotating equipment. (Safety, Quality, Duration and Cost follow up).
• You’ll build relations with technical personnel within Yara Sluiskil, third parties, other Yara sites and the technical network within Yara International;

You’ll make sure that all activities are being executed in conformance with Yara’s Values & Management system.

About Yara Sluiskil

Yara Sluiskil is Yara’s biggest production site. Yara Sluiskil is located in the Ghent-Terneuzen canal and manufactures nitrogen fertilizers and industrial chemicals such as Air 1® and NOxCare®, but also CO2 for the soft drink industry and breweries.
Our vision for the world is based on ensuring a nature-positive food future. A collaborating community that overcomes cultural, environmental, and economic barriers to create solutions that will lead to a world free from hunger and
a planet respected.

Who are you?

You are a highly motivated team player with excellent coordination, communication and social skills. You have the ability to solve complex problems, are eager to drive your own development and anticipate well in a challenging and dynamic environment.

• Bachelor or Master degree in (electro)Mechanical Engineering;
• Experience in maintenance, turnarounds and projects of chemical plants;
• Excellent safety and reliability mindset;
• Fluent in Dutch and English.

Do you recognize yourself in the description above, but are some qualifications missing? Yara wants to invest in people, so we would like to get in touch with you!

What do we offer you?

• Working in an international environment with an open company culture and a strong focus on sustainability;
• Competitive salary and benefits (thirteenth salary, 48 days of annual leave, healthcare benefit);
• Awareness for positive work-life balance (flexible hours, occasional homework);
• Good accessibility from the Ghent area;
• A warm welcome and personal monitoring;
• And on top of that, a bag of homemade fertilizer every year.

Do you feel the chemistry?

Please apply via our website! For more information about the job content, please contact Samantha de Moor, HR Business Partner (tel. +31 115 474 870) or Ousmane Amadou, Head Local Maintenance (tel. +31 115 474 270).

• Maintain and provide technical support to Operations and the Maintenance department for process control systems;
• Assist other discipline engineers with designing plant modifications or new projects and perform configuration on process control systems;
• Develop and install advanced controls to achieve optimal plant performance;
• Optimize reliability and availability of plant processes by developing and implementing preventive maintenance plans for process control systems;
• Build relations with technical personnel within Yara Sluiskil, third parties, other Yara sites and the technical network within Yara International;

 You will make sure that all these activities are being executed in conformance with Yara’s Values & Management system.

About Yara Sluiskil

Yara Sluiskil is Yara’s largest production site. Yara Sluiskil is located at the Ghent-Terneuzen canal and manufactures nitrogen fertilizers and industrial chemicals such as Air 1® and NOxCare®, but also CO2 for the soft drink industry and breweries.
Our vision for the world is based on ensuring a nature-positive food future. A collaborating community that overcomes cultural, environmental, and economic barriers to create solutions that will lead to a world free from hunger and
a planet respected.

Who are you?

You are a highly motivated team player with excellent coordination, communication and social skills. You have the ability to solve complex problems, are eager to drive your own development and anticipate well in a challenging and dynamic environment.

• Bachelor or Master degree in Engineering (Electromechanical, Electrical);
• Experience in engineering and maintenance of control systems in a production environment;
• Excellent safety and reliability mindset;
• Fluent in Dutch and English.

 Do you recognize yourself in the description above, but are some qualifications missing? Yara wants to invest in people, so we would like to get in touch with you!

What do we offer you?

• Working in an international environment with an open company culture and a strong focus on sustainability;
• Competitive salary and benefits (thirteenth salary, 48 days of annual leave, healthcare benefit);
• Awareness for positive work-life balance (flexible hours, occasional homework);
• Good accessibility from the Ghent area;
• A warm welcome and personal coaching;
• And on top of that, a bag of homemade fertilizer every year.

Do you feel the chemistry?

Please apply via our website! For more information about the job content, please contact or Albert Platteeuw, Technical Support Manager (tel. +31 115 474 401) or Samantha de Moor, HR Business Partner (tel. +31 115 474 870).